• đź‘‹ Welcome! If you were registered on Cybertruckownersclub.com as of October 1, 2024 or earlier, you can simply login here with the same username and password as on Cybertruckownersclub.

    If you wish, you can remove your account here.

Tesla Model Y body castings begin to stack up at Giga Texas

MEDICALJMP

Well-known member
First Name
Jeff
Joined
Apr 28, 2020
Threads
164
Messages
851
Reaction score
412
Location
Omaha, NE
Vehicles
Toyota Avalon, Rav4, Tri-motor Cybertruck
Occupation
Nurse
Country flag
Tesla Model Y body castings begin to stack up at Giga Texas
Tesla Model 2 Tesla Model Y body castings begin to stack up at Giga Texas work-pic-update-80x80

ByJoey Klender
Posted on September 10, 2021
https://www.teslarati.com/tesla-model-y-castings-giga-texas-video/


Tesla Model Y castings are beginning to stack up in impressive numbers at the automaker’s Giga Texas plant just outside of Austin. A Snapchat video put up by someone on-site shows perhaps thousands of Model Y castings on the property as Tesla begins to work toward the initial production of the all-electric crossover.
Tesla Giga Texas is slated to begin production later this year, but that is not halting the automaker from starting the pre-production processes of vehicle manufacturing. A focus of Tesla since day 1, the company has always tried to make the manufacturing processes more streamlined through various production efficiencies. The most notable was the introduction of the Giga Press, a massive machine from Italian company IDRA that can cast the body of any of Tesla’s vehicles in a matter of a few seconds. The IDRA presses have been spotted on Giga Texas property in the past, and now it seems Tesla is putting them to work ahead of initial production.

The video was obtained by Teslarati through the Snapchat application, which allows users to scan a map and view Snaps from anywhere on Earth. After finding Giga Texas on the map and accessing the available public Snapchats, it was clear that Model Y castings are beginning to stack up in significant numbers as Tesla prepares to build hundreds of thousands of vehicles at the plant next year.

Tesla has been testing the manufacturing equipment at Giga Texas for several months. In late July, photographs of a Model Y chassis were posted to Reddit, showing a close-to-fully-fabricated body of the all-electric crossover. Some members of the community indicated that it was likely a test frame that was manufactured at the Fremont factory, which was then shipped to Giga Texas to use for calibrating the automated manufacturing machines at the plant. However, Tesla has also built fully-equipped pre-production units since late last month.


Additional Model Y castings were seen in the back of a hauler on site, likely being transported to another portion of the Giga Texas property by Joe Tegtmeyer.


Tesla Model 2 Tesla Model Y body castings begin to stack up at Giga Texas tesla-model-y-casting-scaled

Credit: @JoeTegtmeyer
In late August, Tesla was already building Model Y pre-production units at the factory. The pre-production phases are usually utilized by automakers to test the accuracy and efficiency of the machinery at the site, ensuring that it is ready for wide-scale operation.

Additionally, there were rumors of Cybertruck chassis also being present at the plant. While unconfirmed, an image of Cybertruck-shaped objects wrapped and concealed by covers gained a lot of traction, but it was never confirmed whether Tesla was building the vehicle ahead of its initial production phases, which have been pushed back to late 2022, according to Tesla’s online Design Studio.

Tesla plans to kick off production of Texas-built Model Ys later this year as the plant’s initial construction phases finally conclude.
 

Ogre

Well-known member
First Name
Dennis
Joined
Jul 3, 2021
Threads
135
Messages
7,953
Reaction score
3,498
Location
Ogregon
Vehicles
Model Y
Country flag
I saw this. Are they expecting the assembly line to outpace the Gigapress at first? Or maybe they are planning capacity around 4 presses and since they only have 2 running want to get a head start?

I assume they can just melt down the bad ones and re-cast them so it just seems odd to have so many banging around.
 

FullyGrounded

Well-known member
Joined
Nov 18, 2020
Threads
7
Messages
233
Reaction score
49
Location
blah
Vehicles
blah
Country flag
Maybe practicing with the new Gigapress. Not a bad idea, rather than get your first taste when production starts. That would be sad business practice. peace
 

Crissa

Well-known member
First Name
Crissa
Joined
Jul 8, 2020
Threads
82
Messages
11,771
Reaction score
3,850
Location
Santa Cruz
Vehicles
2014 Zero S, 2013 Mazda 3
Country flag
They have huge piles of these around the Fremont factory, too.

I wonder what's the difference between the ones in the boxes and the ones in the piles, or the ones outside vs the ones inside?

We've already seen them send some off to be recycled, so...

-Crissa
 

swengl

Well-known member
First Name
Steve
Joined
Sep 9, 2021
Threads
11
Messages
380
Reaction score
46
Location
United States
Vehicles
AWD-CT, Model Y
Country flag
It would seem to be pre-production runs to dial in the calibrations on the equipment so that when the factory is ready for full production, they've already knocked out the setup process on the Gigapress(es). Since they can recycle the ones that don't meet specs, this is a smart use of time.
 

Ogre

Well-known member
First Name
Dennis
Joined
Jul 3, 2021
Threads
135
Messages
7,953
Reaction score
3,498
Location
Ogregon
Vehicles
Model Y
Country flag
I'd kind of assumed they could recycle them on site since they have a furnace there.
 

Crissa

Well-known member
First Name
Crissa
Joined
Jul 8, 2020
Threads
82
Messages
11,771
Reaction score
3,850
Location
Santa Cruz
Vehicles
2014 Zero S, 2013 Mazda 3
Country flag
I'd kind of assumed they could recycle them on site since they have a furnace there.
Billet size and weight is an issue for the on-site furnace. You have to do it in an airless space (or at least oxygen free) so bigger is much more complex.

I wondered the same.

-Crissa
 

Ogre

Well-known member
First Name
Dennis
Joined
Jul 3, 2021
Threads
135
Messages
7,953
Reaction score
3,498
Location
Ogregon
Vehicles
Model Y
Country flag
Billet size and weight is an issue for the on-site furnace. You have to do it in an airless space (or at least oxygen free) so bigger is much more complex.
That makes sense. They won't have big numbers of units they need to recycle once things get going so no point in having a way of breaking them down on site. Or maybe they are getting one but it's not set up yet.
 
 
Top