? Metallic Silver Cyberbeast 3D Laser-Cut Emblems

[getsometom]

Many of you reached out and wanted a silver alternative to the original gloss black Cyberbeast emblem. Here you go , these are laser-cut from metallic silver acrylic.

Two sizes available for different placement locations with optional peel and stick backing. Images pictured are on the 3M metallic brushed black wrap.

Two sizes available:
7.75" x 4" x 0.125" (1/8 inch)
5.5" x 2.75" x 0.125" (1/8 inch)

Silver metallic Cyberbeast emblem
https://makerspacedude.etsy.com/listing/1761956307/cyberbeast-3d-laser-cut-emblem-badge

Gloss black Cyberbeast emblem
https://makerspacedude.etsy.com/listing/1758942935/cyberbeast-3d-laser-cut-emblem-badge

Silhouette frame
https://makerspacedude.etsy.com/listing/1705864246/cybertruck-silhouette-stainless-steel

Graffiti vanity plate
https://makerspacedude.etsy.com/listing/1742476153/cybertruck-graffiti-vanity-decorative

Disclaimer:
These graphics and shapes are inspired by Tesla Cybertruck and are in no way meant to copy and/or reproduce Tesla's graphic assets.

 

[BeFamousVideo]

Many of you reached out and wanted a silver alternative to the original gloss black Cyberbeast emblem. Here you go , these are laser-cut from metallic silver acrylic.

Two sizes available for different placement locations with optional peel and stick backing. Images pictured are on the 3M metallic brushed black wrap.

Two sizes available:
7.75" x 4" x 0.125" (1/8 inch)
5.5" x 2.75" x 0.125" (1/8 inch)

Silver metallic Cyberbeast emblem
https://makerspacedude.etsy.com/listing/1761956307/cyberbeast-3d-laser-cut-emblem-badge

Gloss black Cyberbeast emblem
https://makerspacedude.etsy.com/listing/1758942935/cyberbeast-3d-laser-cut-emblem-badge

Silhouette frame
https://makerspacedude.etsy.com/listing/1705864246/cybertruck-silhouette-stainless-steel

Graffiti vanity plate
https://makerspacedude.etsy.com/listing/1742476153/cybertruck-graffiti-vanity-decorative

Disclaimer:
These graphics and shapes are inspired by Tesla Cybertruck and are in no way meant to copy and/or reproduce Tesla's graphic assets.

It might look more OEM if the emblem was half the thickness.

 

[digitalboi]

Could you do it in gold?

 

[getsometom]

It might look more OEM if the emblem was half the thickness.

Thanks for the feedback. I know some people were wanting more height for the 3D effect but I'll keep a thinner version in mind.

 

[getsometom]

Could you do it in gold?

I can make it in gold. What sizes are you looking for?

 

[digitalboi]

I can make it in gold. What sizes are you looking for?

I'd like to put it over the rear image so whatever size that is? lol

 

[getsometom]

I'd like to put it over the rear image so whatever size that is? lol

I got you The emblem on the rear tailgate is 5.5" wide like the small sized version currently on the Etsy store. Here is an example of the silver emblem next to the Cyberbeast engraving on the tailgate.

For the gold color, are you looking for a reflective mirrored finish or more satin like the stainless steel that isn't reflective? This will help me source the right material.

 

[digitalboi]

I was thinking the reflective gold

 

[getsometom]

I was thinking the reflective gold

Sounds good. Feel free to place an order on Etsy and add a note about the gold so I know which one is yours. I've ordered the material, it'll be cut once it arrives tomorrow.

 

[Teslajake]

Many of you reached out and wanted a silver alternative to the original gloss black Cyberbeast emblem. Here you go , these are laser-cut from metallic silver acrylic.

Two sizes available for different placement locations with optional peel and stick backing. Images pictured are on the 3M metallic brushed black wrap.

Two sizes available:
7.75" x 4" x 0.125" (1/8 inch)
5.5" x 2.75" x 0.125" (1/8 inch)

Silver metallic Cyberbeast emblem
https://makerspacedude.etsy.com/listing/1761956307/cyberbeast-3d-laser-cut-emblem-badge

Gloss black Cyberbeast emblem
https://makerspacedude.etsy.com/listing/1758942935/cyberbeast-3d-laser-cut-emblem-badge

Silhouette frame
https://makerspacedude.etsy.com/listing/1705864246/cybertruck-silhouette-stainless-steel

Graffiti vanity plate
https://makerspacedude.etsy.com/listing/1742476153/cybertruck-graffiti-vanity-decorative

Disclaimer:
These graphics and shapes are inspired by Tesla Cybertruck and are in no way meant to copy and/or reproduce Tesla's graphic assets.

Can you do a flat black one in the smaller size? Peel and stick version stays pretty attached? It’s a 3M? Right now i have a sticker but not sure how long it’ll last

 

[getsometom]

Can you do a flat black one in the smaller size? Peel and stick version stays pretty attached? It’s a 3M? Right now i have a sticker but not sure how long it’ll last

Unfortuantely I have not seen any great flat colored acrylic sheets. Most flat sheets are ABS which do not laser well.

The peel and stick backing is a translucent ultra thin 0.09mm layer. It's permanent, acid-free and is not made to be easily removed so make sure you pick a permanent location. ?

I stuck the double headed screaming eagle on my AWD with the peel and stick backing. Even in hot Texas heat, it's not going anywhere.

 

[Teslajake]

Unfortuantely I have not seen any great flat colored acrylic sheets. Most flat sheets are ABS which do not laser well.

The peel and stick backing is a translucent ultra thin 0.09mm layer. It's permanent, acid-free and is not made to be easily removed so make sure you pick a permanent location. ?

I stuck the double headed screaming eagle on my AWD with the peel and stick backing. Even in hot Texas heat, it's not going anywhere.

Ok no problem, i may paint it a matte black, but the gloss black looks pretty matte actually, i may order soon. Thanks!!

 

[getsometom]

I was thinking the reflective gold

Your reflective gold emblem has been shipped.

I cut out a few more in case others are interested plus some bigger versions too. They look ?

 

[getsometom]

Thanks everyone, all the emblems ordered have been shipped. Can’t wait to see your pictures.