Underground SR5 on 2.5" ReadyLift lift kit, Method 703 +0 offset and Nitto Recon Grappler 285/70/17

[Skiddy]

2025 4 Runner completed with a 2.5" ReadyLift Suspension Kit, 17x8.5 Method 703 Race wheels (+0 offset) and 285/70/17 Nitto Recon Grapplers

So far no Rubbing no cutting and just a minor adjustment to front inner wheel wells. The ride is very good and these Recon Grapplers are very quiet much like ATs

Everything fit easily in the truck for the trip to shop.

 

[Keroppi]

Looks awesome @Skiddy!! How's the drive / steering with the chunkier wheels and higher center of gravity? Any increased squat / dive from sitting 2.5" inches higher now?

And it's never truly "completed" so what are the next mods?

 

[Skiddy]

So far very happy with the steering and these tires produce less road noise than expected. The 0 offset Method 703's produced a little more protrusion than I was expecting, about 2". I was hoping to be flush with the wheel wells but meh.
There is a little more dive on hard turning for sure and the ride has stiffened up to where you feel your terrain a little more but still an amazing ride.
Yes its never really finished is it....

 

[JuliusBrown]

So far very happy with the steering and these tires produce less road noise than expected. The 0 offset Method 703's produced a little more protrusion than I was expecting, about 2". I was hoping to be flush with the wheel wells but meh.
There is a little more dive on hard turning for sure and the ride has stiffened up to where you feel your terrain a little more but still an amazing ride.
Yes its never really finished is it....

Yeah I hear many people are running +22mm to +35mm offset to reduce wheel poke. I did not realize that more positive offset = less wheel poke.

 

[AlanA]

So far very happy with the steering and these tires produce less road noise than expected. The 0 offset Method 703's produced a little more protrusion than I was expecting, about 2". I was hoping to be flush with the wheel wells but meh.
There is a little more dive on hard turning for sure and the ride has stiffened up to where you feel your terrain a little more but still an amazing ride.
Yes its never really finished is it....

What is the off set?

 

[Skiddy]

0 offset

 

[AZGOLD]

With that offset, your risking a lot of paint dings

 

[Burgi]

Those look great. I’m going to get the 703s with +35 offset.