? Cybertruck Graffiti Vanity License Plate

[getsometom]

Make your Cybertruck stand out with this laser-etched vanity license plate with the Cybertruck graffiti shape to reveal the material under it's gloss black coating. Complete the look by adding the Silhouette license plate frame for the perfect pairing.

One of the reasons why I chose to use this vanity plate supplier is due to it's size being slightly smaller than US license plates to give it a better chance in avoiding Tesla's horrible front camera angle. The vanity plate also has wide holes for screw fittings to allow further horizontal fine-tuning.

Vanity plate size: 11 5/8" x 5 7/8" rounded up for safety
US license plate size: 12" x 6"

Attached is a picture of the front camera with the front vanity plate. I'd say it's 99.9% not visible with the slightest shadow on the bottom left. However knowing Tesla's camera calibrations, your camera views may vary.

Mounting screws are not included; please use the same screws included with the Cybertruck’s license plate hardware.

Disclaimer:
These graphics and shapes are inspired by Tesla Cybertruck and are in no way meant to copy and/or reproduce Tesla's graphic assets.

This vanity license plate is a novelty item. It is not intended to replace your state-issued license plate. It is only intended for decorative use in states that do not require a front license plate.

Vanity plate:
https://makerspacedude.etsy.com/listing/1742476153/cybertruck-graffiti-vanity-license-plate

If you only want the Silhouette frame:
https://makerspacedude.etsy.com/listing/1705864246/cybertruck-silhouette-stainless-steel

 

[Deleted member 4]

Looks great! I like how despite being gloss black, the plate meshes well with the factory bumper's satin black finish.

 

[cybertruckwaldo]

Any interference with the front camera?

 

[getsometom]

Any interference with the front camera?

I will take some pictures this evening with the front camera

 

[TexasRaider]

Any interference with the front camera?

Great question! My current license plate cover obscures part of my front camera.

 

[Electric Ace]

Make your Cybertruck stand out with this laser-etched vanity license plate with the Cybertruck graffiti shape to reveal the material under it's gloss black coating. Complete the look by adding the Silhouette license plate frame for the perfect pairing.

This vanity license plate is a novelty item. It is not intended to replace your state-issued license plate. It is only intended for decorative use in states that do not require a front license plate.

Mounting screws are not included; please use the same screws included with the Cybertruck’s license plate hardware.

Includes:
1x Cybertruck Graffiti Vanity License Plate

Disclaimer:
These graphics and shapes are inspired by Tesla Cybertruck and are in no way meant to copy and/or reproduce Tesla's graphic assets.

Vanity plate:
https://makerspacedude.etsy.com/listing/1742476153/cybertruck-graffiti-vanity-license-plate

If you only want the Silhouette frame:
https://makerspacedude.etsy.com/listing/1705864246/cybertruck-silhouette-stainless-steel

Do you have one with the Cerberus Beast logo?

 

[getsometom]

@cybertruckwaldo @TexasRaider

One of the reasons why I chose to use this vanity plate supplier is due to it's size being slightly smaller than US license plates to give it a better chance in avoiding Tesla's horrible front camera angle. The vanity plate also has wide holes for screw fittings to allow further horizontal fine-tuning.

Vanity plate size: 11 5/8" x 5 7/8" rounded up for safety
US license plate size: 12" x 6"

Here is a picture of the front camera with the front vanity plate. I'd say it's 99.9% not visible with the slightest shadow on the bottom left. However knowing Tesla's camera calibrations, your camera views may vary.

 

[getsometom]

Do you have one with the Cerberus Beast logo?

I may or may not already be working on one ?

 

[getsometom]

Thanks for your orders everyone. They’ve all been shipped from today.

 

[wtibbit]

Finally! Now people won't come up to me and ask, "What the heck is that!??" They can just read that plate and know it's a...it's a...ah... "Hey! How'm I supposed to read that?? That's some kinda foreign language!"

I'm just kidding a bit. I like it a lot! I might get one even though we have front plates in Texas.

 

[getsometom]

Finally! Now people won't come up to me and ask, "What the heck is that!??" They can just read that plate and know it's a...it's a...ah... "Hey! How'm I supposed to read that?? That's some kinda foreign language!"

I'm just kidding a bit. I like it a lot! I might get one even though we have front plates in Texas.

Glad you like it.

I also run without a front plate in Texas but liked it so much after installing these to take pictures that I decided to leave them on. It just fits the overall aesthetic IMO

 

[WHIZZARD OF OZ]

Make your Cybertruck stand out with this laser-etched vanity license plate with the Cybertruck graffiti shape to reveal the material under it's gloss black coating. Complete the look by adding the Silhouette license plate frame for the perfect pairing.

One of the reasons why I chose to use this vanity plate supplier is due to it's size being slightly smaller than US license plates to give it a better chance in avoiding Tesla's horrible front camera angle. The vanity plate also has wide holes for screw fittings to allow further horizontal fine-tuning.

Vanity plate size: 11 5/8" x 5 7/8" rounded up for safety
US license plate size: 12" x 6"

Attached is a picture of the front camera with the front vanity plate. I'd say it's 99.9% not visible with the slightest shadow on the bottom left. However knowing Tesla's camera calibrations, your camera views may vary.

Mounting screws are not included; please use the same screws included with the Cybertruck’s license plate hardware.

Disclaimer:
These graphics and shapes are inspired by Tesla Cybertruck and are in no way meant to copy and/or reproduce Tesla's graphic assets.

This vanity license plate is a novelty item. It is not intended to replace your state-issued license plate. It is only intended for decorative use in states that do not require a front license plate.

Vanity plate:
https://makerspacedude.etsy.com/listing/1742476153/cybertruck-graffiti-vanity-license-plate

If you only want the Silhouette frame:
https://makerspacedude.etsy.com/listing/1705864246/cybertruck-silhouette-stainless-steel

CYBERSHEEK
It's all GEEK to me....but l like it.

 

[getsometom]

CYBERSHEEK
It's all GEEK to me....but l like it.

lol cybersheek, maybe I should make a frame that says that

 

[getsometom]

Dropped off all the orders at the post office

 

[getsometom]

Do you have one with the Cerberus Beast logo?

Your wish is complete ?
https://makerspacedude.etsy.com/listing/1730692568/cyberbeast-vanity-decorative-license